Comparative method for indirect sensitivity measurement of UHF RFID reader with respect to interoperability and conformance requirements

There is never-ending race for the competitive advantage that forces RFID technology service integrators to focus more on used technology qualitative aspects and theirs impacts inside RFID ecosystem. This paper contributes to UHF RFID reader qualitative parameters evaluation and assessment problematic. It presents and describes in details indirect method and procedure of sensitivity measurement created for UHF RFID readers. We applied this method on RFID readers within prepared test environment and confirmed long term intention and recognized trend. Due to regulations limitations, there is not possible to increase output power over defined limits, but there are possibilities to influence reader sensitivity. Our proposal is to use customized comparative measurement method with insertion loss compensation for return link. Beside the main goal achievement, results show as well the qualitative status of development snapshot of reader. Method and following experiment helped us to gain an external view, current values of important parameters and motivation we want to follow up on as well as compared developed reader with its commercial competitors

Software implementation of a secure firmware update solution in an IoT context

The present paper is concerned with the secure delivery of firmware updates to Internet of Things (IoT) devices. Additionally, it deals with the design of a safe and secure bootloader for a UHF RFID reader. A software implementation of a secure firmware update solution is performed. The results show there is space to integrate even more security features into existing devices

RFID platform as a service, containerized ecosystem, feasibility and security impact analysis

This paper presents a new concept as a special type of virtualization of particular event based communication components in RFID ecosystems. The new approach is containers based virtualization, and it is applied and tested on the container of Object name service. The results of the experiment allowed us to do the preliminary analysis of security consequences on the isolated containerized DNS-based RFID sub-service. We confirmed feasibility with this sandboxing technology represented by the special container. They bring the benefits in terms of efficient software component life-cycle management and integrity improvements. Experiments results of the containerization are discussed to show the possible isolation ways of other components like EPCis and middleware. There is present evaluation towards external threats and vulnerabilities. The result is a higher level of integrity, availability of whole ecosystem and resiliency against external threats. This gives a new opportunity to build robust RFID as Platform as a service, and it proves the ability to achieve a positive impact on the end to end service Quality of service

MIDI over Ethernet

V této práci je navržen přípravek sloužící k adaptaci protokolu MIDI pro použití v rámci počítačové sítě. Práce dále popisuje síťový ovladač, kterým lze tyto přípravky ovládat.This paper is about designing and building a device to adapt MIDI protocol for use on a standard computer network. The paper also includes a brief description of a network editor, which controls the whole system.

Comparison among models to estimate the shielding effectiveness applied to conductive textiles

The purpose of this paper is to present a comparison among two models and its measurement to calculate the shielding effectiveness of electromagnetic barriers, applying it to conductive textiles. Each one, models a conductive textile as either a (1) wire mesh screen or (2) compact material. Therefore, the objective is to perform an analysis of the models in order to determine which one is a better approximation for electromagnetic shielding fabrics. In order to provide results for the comparison, the shielding effectiveness of the sample has been measured by means of the standard ASTM D4935-99

European Union from the Perspective of Urbanization

Department of Demography and GeodemographyKatedra demografie a geodemografieFaculty of SciencePřírodovědecká fakult

Design of solar harvested semi active RFID transponder with supercapacitor storage

This paper presents the analysis, design and manufacture of a low cost, low maintenance and long-range prototype of RFID transponder with continuous operability. A prototype of semi-active RFID transponder is produced with a range that can be extended via a DC input to allow all of the readers signal power to be reflected via backscatter modulation. The transponder is powered via solar harvested power which is selected over other energy harvesting technologies as it provides a greater energy density and lower cost. Solar has one major drawback in terms of providing a steady DC voltage in it needed a constant supply of sunlight. A method of power storage is proposed, and the use of a supercapacitor over a rechargeable battery is used as it has a longer lifespan due to higher recharge rates. The prototype underwent a series of experiments in various working environments and proves an effective solution in providing long lasting operability. The paper concludes the use of solar harvesting with supercapacitor storage has potential for further uses in external remote sensors used in the Internet of Things

The properties of recycled rubber from waste tires in the production of cement composites

This article presents the results of a study dealing with the use of a combination of recycled rubber from waste tires as a 100% substitute in the production of cement composites. Aggregate was replaced with recycled rubber in two ratios, namely the ratio of 50/50 and the ratio of 40/60 of the share of fraction 0/1 mm and fraction 1/3 mm. The designed formulas of cement compositeswere subjected to the tests of their physical and mechanical properties in order to determine the properties of the used recycled rubber combination. The tests included the consistency of the grain curve, mixing water properties, consistency of cement mortar, and strength characteristics (tensile flexural strength and compressive strength). The study presents results that are fundamentally different from the comparative samples and their use in the building industry; however, at the same time, they open upnew possibilities of their utilization as a building material

Wearable textile electrodes for ECG measurement

The electrocardiogram (ECG) is one of the most important parameters for monitoring of the physiological state of a person. Currently available systems for ECG monitoring are both stationary and wearable, but the comfort of the monitored person is not at a satisfactory level because these systems are not part of standard clothing. This article is therefore devoted to the development and measurement of wearable textile electrodes for ECG measurement device with high comfort for the user. The electrode material is made of electrically conductive textile. This creates a textile composite that guarantees high comfort for the user while ensuring good quality of ECG measurements. The composite is implemented by a carrier (a T-shirt with flame retardant) and sensing electrodes embroidered with yarn based on a mixture of polyester coated with silver nanoparticles and cotton. The electrodes not only provide great comfort but are also antibacterial and antiallergic due to silver nanoparticles